Daylight Technologies

Systems and controls for harnessing daylight

Good daylighting design provides useful illumination while minimizing heat gain and glare. Adequate daylighting reduces dependence on artificial light and is thus key to NZEBs. Appropriate use of windows, skylights, clerestories, and other apertures in the building provide means to harvest daylight. Modern technology even integrates daylighting systems with electric lighting to optimize lighting energy use. In this webinar, Sekhar Nori, an award-winning daylighing solutions expert, discusses various technologies and controls for harvesting daylight.

Skylights are prominently used in warehouses and similar typologies to provide illumination to large spaces. A low skylight-to-floor ratio (SFR) of around 1% is considered adequate in India, as compared to 5% for locations at higher latitudes. Beyond that results in heat gain.

Effect of good daylighting

Multi-glazed skylights are double glazed and triple glazed solutions for the skylights with improved heat and glare reduction. Lightpipes can be used for both top or side lighting to deliver diffused sunlight into dark corners and even basements. Lightpipes capture sunlight using a light collector exposed to sunlight and transport it through a highly reflective pipe. The lightpipe’s diameter determines the intensity of the diffused light delivered. Sekhar highlights the efficiency of his flagship product where the maximum run of the light pipes is as high as 15 meters.

Next, we learn about light shelves, horizontal surfaces that can reflect daylight deep into building interiors. The system of lightshelves of Skyshade blocks about 70-80% of the direct sunlight and reflects the remaining 20-30% of the sunlight into the room. This provides enough lighting for the room and also reduces the glare and heat transmission in the room.

Modern hybrid systems even integrate with the Building Management System (BMS). Since daylight flux doesn’t remain constant through the day, BMS integration facilitates the lighting requirement from electrical lights for the building. These systems may monitor only daylit area (Open loop systems) or areas that use both daylighting and electrical lighting systems (Closed loop systems).

Moving on in the webinar, Sekhar also offers insights into several projects that have successfully deployed daylighting systems, including new constructions and retrofits. For example, the Secunderabad Railway Station was retrofit with wall-mounted daylighting systems. Infact, the Indian Railways is planning to convert several of its other buildings to daylit spaces. The Rae Bareli Modern coach factory is the largest project in Asia to use daylighting systems. The Chennai International Airport under construction will use sun-tracking daylighting systems completely integrated with the electric lighting system.

Sky-Tracking Daylighting systems in the upcoming Chennai International Airport
Secunderabad Railway station was retrofitted with wall-mounted lightpipes

The expected energy savings from these hybrid systems is about 40-50% for buildings operating 24 hours and it rises to around 70-80% for 10-12 hours of building operation. But, are these systems economically viable? In the webinar, we learn that typical projects can expect a payback period of around 2 years as compared to using fully LED systems. The payback period will be still lower if we take into consideration cooling load reduction. Considering the energy savings, from lighting and cooling loads, and the economics, the use of daylight technologies becoming a norm in retrofit and new projects makes sense.

This webinar was conducted on 4th August, 2019.

Shekhar Nori | CEO, Skyshades Inc.

He is a strong proponent of daylight systems designed for high performance. As CEO of Skyshades Inc., he has perfected cutting-edge daylighting and shading solutions adapted for the Indian climate and customized for different applications. The recipient of 5 National Awards for Product Innovation, his firm has provided lighting solutions for Fortune 500 companies like Pepsi, Unilever, and Toyota.

Q.Can the daylight in the lightpipe be controlled?
Yes. Lightpipes have a dimmer system which comprises of a motor and a diaphragm. Daylight can be blocked with the click of a switch.

Q. Is daylighting a commercially viable option when constructing a big multi-storey building?
Yes. Daylighting is a very viable option for large projects. When you consider the savings from lighting and heating loads, the payback period of daylighting can be as less as 1 year. Hence, daylighting should be seriously considered and pursued in the construction of large projects.

Q. What are the maximum lux levels that can be achieved in a lightpipe system?
As much as 1000 lux.

Q. Are the lightshelve panels removable?
Yes. They can be easily removed.

Q. Is the Skyshelf an integral part of the window system? Or can it be retrofitted to any existing window panel?
It can be retrofitted to an existing window panel.

Q. What is the max advisable length for daylight pipes?
About 12m or 40 ft.

Q. Can Skyshades be installed in the existing glazed systems?
Yes. Retrofitting is the most common modes of installation.

Q. Can the lightpipes be integrated with BMS?
There are daylight sensors and controllers that can be integrated with BMS.

View webinar presentation-Daylight Technology

Disclaimer: This website is made possible by the support of the American People through the United States Agency for International Development (USAID). The contents of this website are the sole responsibility of Environmental Design Solutions and do not necessarily reflect the views of USAID or the United States Government.